This air shower is used for the decontamination of personnel before entering clean rooms for avoiding contamination. Personal and materials entering or exiting the controlled environment are “scrubbed”by high velocity HEPA filtered air jets.Contaminated air is then drawn complete the base within the unit filtered and recirculated.
High velocity shower jets in excess of 25m/s ensure efficient scrubbing action to remove particulate matter.
Operating modes can be programmed in the field.
Control panel supervises all functions.
HEPA filter, filtration achieves > 99.99% typical efficiency at 0.3 micron particles.
A disposable pre-filter with 85% arrestance extends the life of the main filter.
An emergency stop button is mounted on sides of the shower.
Auto-Inductive when people come into the booth and the air nozzle begin to work.
Permanently lubricated direct drive centrifugal blowers are used in conjunction with stainless steel air nozzles.
Interlock Door System.
Two stage filtration system
G4 coarse filter/H14 Efficiency configuration
DOP detection port(High side tank filter)
Differential pressure gauge
High efficiency display differential pressure gauge(USA DWYER)
Air speed sensor ( E+E)
Pressure difference, fault alarm
Power supply (luminous ring visible buttons) with emergency stop
Product schematic diagram
standard size and parameters
Work area size
Note: Air shower room and air shower channel not listed in the table can be made according to the customers' requirements